implen nanophotometer protein uv applications nanodrop alternative icon Protein UV

Integrating a NanoPhotometer®, a best in class Protein UV spectrophotometer, with a Laboratory Information Management System (LIMS) involves connecting and synchronizing the two systems to streamline data management, improve data integrity, and enhance overall laboratory efficiency. Integrating it with a LIMS can help automate data entry, reduce manual errors, and facilitate data traceability and reporting. In combination with an ERP system integration the NanoPhotometer® can help to significantly reduce hands on time/cost whilst reducing the human error when producing the necessary QC documents to fulfill an order using the proprietary NanoPhotometer® REST API PUSH Service.

How to Measure Protein UV Concentrations

The Protein UV method exploits the inherent absorbance of proteins at 280 nm in combination with the Beer-Lambert law, where each protein is characterized by a specific extinction coefficient (ε) which can be used to determine total protein concentration of a solution. The intrinsic absorbance of proteins is due to the presence of aromatic amino acids in their structure, primarily tryptophan and tyrosine, as well as cysteine (oxidized cysteine residues in a disulphide bond). The aromatic amino acid residues in a protein containing tryptophan and tyrosine exhibit strong intrinsic absorbance at 280 nm, with a lesser contribution by phenylalanine. Therefore, it is the aromatic amino acid residues which dictate the extinction coefficient at 280 nm for a protein.

The most straightforward method to determine concentration of a purified, homogenous protein with a known extinction coefficient (ε) is by direct measurement of UV280 provided the protein contains no prosthetic groups with strong absorption in the same region. However, for unknown proteins including homogenous protein mixtures, it is possible to make direct A280 measurements using a composite ε value derived from comparison of many proteins, although this will only provide an approximate but close estimate of the true protein concentration.

scientist-works-in-laboratory-implen-nanphotometer-protein-UV-applications-sq
protein-uv-spectrophotometer-concentration-measuments-formula-implen-nanophotometer-alternative-to-nanodrop-sm

The NanoPhotometer®, one of the top Protein UV Spectrophotometers on the market, determines protein concentration by performing calculations based on specific ε values, either pre-programmed in the instrument or entered manually by the user. Extinction coefficient (ε) values at 280 nm vary greatly for different proteins due to their particular aromatic amino acid content.

Fixed ε values are pre-programmed in the software of the Protein UV Spectrophotometer for several proteins. However, if the protein of interest is not included in the pre-programed methods, it is also possible to manually enter the specific ε for the protein of interest using the custom Mol. Ext. Coefficient, custom Ext. Coefficient or custom 1/Ɛ protein factor option. For correct calculation, it is necessary to supply either: a) the molar extinction coefficient (εM in M-1 *cm-1 ) and the molecular weight expressed in molar mass units (g/mol); b) the mass extinction coefficient (ε in l/g*cm) or c) the protein factor 1/Ɛ of the protein.

A common calculator to determine the extinction coefficient of proteins is available here:

To calculate the degree of dye labelling of a protein, the absorbance measured at the wavelength corresponding to the absorbance maximum of the fluorescence dye is used. The corresponding extinction coefficient of the dye is used along with the Beer-Lambert law to determine the dye concentration. Please refer to the manual of the manufacturer of the fluorescence dye used for the labeling of the sample.

Wavelengths for Measuring Protein UV Concentrations

nucleic-acid-concentration-measuments-implen-nanophotometer-nanodrop-alternative-tr
The Lambert-Beer law, also known as Beer’s law, empirically relates the absorption of light to the properties of the sample. This law states that there is a logarithmic relationship between the transmission of light through a specific sample (T = I/Io with I = outgoing light and Io = incoming light), the molar extinction coefficient for a specific compound (ε), the concentration of the absorbing species in the material (c) and the distance the light travels (d).

What is 260/280 ratio?

The ratio calculation of the absorbance at 260 and 280 nm (260/280 ratio) is monitored by a Protein UV spectrophotometer to indicate the quality of a protein purification. Different protein structures generally have an influence on the 260/280 ratio. Aromatic amino acids such as tryptophan and tyrosine e.g. absorb at 280 nm, while other amino acids contribute at different wavelengths at which the sample will absorb. Some buffers used in the purification process can also influence the ratio, especially if the buffer contains components that absorb in the same UV spectrum (see graphs below). A 260/280 ratio less than 0.60 in general is a good indication of whether a protein has been purified with minimal nucleic acid contamination left in the sample. Initial crude lysates may show a much higher value even around 2, this reading will decrease as contaminants are removed during the purification process. A reading higher than 5 mAbs at 320 nm is indicating that either salt residues or undissolved particles are present in the sample.
implen-nanophotometer-NP80-for-protein-UV-spectrophotometer-measurement-applications-alternative-to-nanodrop-and-warning-screen

Protein UV Quantification with NanoPhotometer® NP80

Let’s cover the performance of the NanoPhotometer® NP80, top Protein UV Spectrophotometer, in terms of linearity and accuracy, applying small volume protein quantification at 280 nm (Protein UV280). Protein samples display a characteristic absorption spectrum at 280 nm, predominantly from the aromatic amino acids phenylalanine, tyrosine, and tryptophan. The Lambert-Beer law can be applied to determine the protein concentration in a sample. This UV based approach depends strongly on the purity and primary sequence of a protein. Some components which are commonly present in protein samples show strong UV absorbance, and should be corrected for or avoided altogether. The NanoPhotometer® unique feature Blank Control™ will automatically warn the user if high background is present in a blank from buffers or contaminants.

Material & Methods

Bovine serum albumin (BSA) solution A7284 (Lot. SLBP4169V) from Sigma-Aldrich was used as stock solution. Different sample concentrations were achieved by dilution with defined amount of 1x PBS buffer. The dilution ratio was controlled by weight via microbalance (Sartorius BP221S). Expected absorbance values were measured in 10 mm quartz glass cuvettes (Hellma Analytics 100-QS) with UV/VIS spectrometer UVIKON XL (serial number 110178). All measurements were done on the Protein UV Spectrophotometer, NanoPhotometer® NP80 (serial number M80706).

Each protein concentration was measured using Protein UV Spectrophotometer NP80 five times without prior dilution using a sample volume of 1 μl. Each sample was vortexed before every measurement to ensure sample homogeneity. After each measurement, the pedestal and the lid of Protein UV Spectrophotometer NP80 were cleaned with a slightly wet lint free tissue and a new aliquot of the sample was pipetted.

implen-nanophotometer-NP80-for-protein assay-measurement-applications-nanodrop-alternative-cleaning-lid

Precision and Accuracy of the Protein UV Spectrophotometer Measurement Results

Accuracy Results

The expected protein concentration was compared to the mean value of the five measured concentrations of each protein samples (Table 1). Additionally, the standard deviation of the mean absorbance at the 0.67 mm / 0.07 mm path of each sample is listed.

Linearity Results

The resulting linearity curve in the range of 0.0380 – 276.98 mg/ml shows a close correlation between expected and measured concentrations with a coefficient of determination (R2) of 0.9997 (Figure 1). Figure 2 shows the linearity for low concentration samples measured with path length 0.67 (dilution factor 15).

Ratio

The Protein UV Spectrophotometer, NanoPhotometer® NP80,  calculates the 260/280 ratio which accounts for contaminants in the sample. The 260/280 ratio primarily indicates the presence of nucleic acids in the protein sample. Purified protein preparations have an expected ratio of around 0.57. Protein samples used within this technical note had 260/280 ratios between 0.585 and 0.636 for concentrations in a range of 0.705 – 276.8 mg/ml. Figure 3 shows the linearity of high concentrated BSA samples in the range of 68.326 – 276.98 mg/ml.

implen-nanophotometer-protein-uv-mean-absorbance-0.67---0.07-mm-path

Table 1. NP80 Expected vs. Measured Protein Concentrations

implen-nanophotometer-protein-UV-measurement-applications-nanodrop-alternative1-linearity-results

Figure 1:
Protein samples (mean value) in the range of
0.038 – 276.98 mg/ml
measured with the NP80 using
automatic path length selection.

implen-nanophotometer-protein-UV-measurement-applications-nanodrop-alternative2-linearity-results

Figure 2:
Protein samples (mean value) in the range of
0.038 – 39.097 mg/ml
measured with the NP80 using
path length 0.67 mm.

implen-nanophotometer-protein-UV-measurement-applications-nanodrop-alternative3-linearity-results

Figure 3:
Protein samples (mean value) in the range of
68.326 – 276.98 mg/ml
measured with NP80 using
path length 0.07 mm.

Carryover

Highly concentrated protein samples are known to be sticky. To show that cleaning with just a slightly wet lint-free tissue is appropriate, the blank solution (1x PBS) was measured five times after the final protein sample reading. No residual concentration of protein or absorbance at 280 nm was detected (Figure 4). The absorbance at 280 nm (0.67 mm path) is within the specified fluctuation of the lamp (± 0.002 A).

Figure 4:
No carryover was detected. Absorbance at 280 nm (0.67 mm path) of five 1x PBS measurements measured after the last protein sample.

implen-nanophotometer-protein-uv-no-carryover-absorbance-280-nm
CHAMPS implen nanophotometer protein UV applications nanodrop alternative CHAPS
T-PER implen nanophotometer protein UV applications nanodrop alternative T-PER
PROTEASE INHIBITORS implen nanophotometer protein UV applications nanodrop alternative PROTEASE INHIBITORS
M-PER implen nanophotometer protein UV applications nanodrop alternative M-PER
NDSB implen nanophotometer protein UV applications nanodrop alternative NDSB

DTT

implen nanophotometer protein UV applications nanodrop alternative DTT

RIPA

implen nanophotometer protein UV applications nanodrop alternative RIPA
HEPES implen nanophotometer protein UV applications nanodrop alternative HEPES

Accuracy and Linearity of the NanoPhotometer®, Protein UV Spectrophotometer

implen-nanophotometer-N60-protein-UV-spectrophotometer-curves-alternative-to-nanodrop-gr
The NanoPhotometer® is the only Protein UV Spectrophotometer with True Path Technology™ providing accurate results without the need for recalibration throughout the entire lifetime of the instrument.

The presented data illustrate the high accuracy and linearity of the Implen NanoPhotometer®, best in class Protein UV spectrophotometer, across the entire dynamic range of the instrument. With this novel approach of only two precise path lengths with fixed anchor points utilizing the proprietary True Path Technology™ in a sealed optical environment, mechanical changes in the system are eliminated.

For further technical information please refer also to Technical Note #1 True Path Technology™.

NanoPhotometer® Models that Work Best for Protein UV Quantification

All units are battery powered and require NO maintenance or recalibration for a lifetime. They also can be used for the following applications: dsDNA, ssDNA, RNA, mRNA, miRNA, Oligos, Proteins and Antibodies including dye labeled samples, small molecules in organic solvents, kinetics in a drop and more.

implen 12-channel nanophotometer N120 for nucleic acid measurements, nanodrop alternative

NanoPhotometer®

N120

Microvolume High Throughput Spectrophotometer

• High-Performance Microvolume Spectrophotometer

• Only 1.7 sec per sample, 20 sec per run (12 samples)

• Full high-resolution scan from 200-900 nm for each sample Learn More

Free Trial Purchase
implen spectrophotometer cuvette nanophotometer NP80 for nucleic acid measurements, nanodrop alternative

NanoPhotometer®

NP80

All-in-One

Spectrophotometer

• All-in-One Spectrophotometer

• Micro-volume and cuvette capability

• Built-in vortexer

• Full high-resolution scan from 200-900 nm for each sample

• Temperature Controlled Cuvette Holder

• Starting at 0.3 µl sample volume Learn More

Free Trial Purchase
implen spectrophotometer cuvette nanophotometer N60 for nucleic acid measurements, nanodrop alternative

NanoPhotometer®

N60*/N50

Microvolume

Spectrophotometer

• High-Performance Micro Volume Spectrophotometer

• Starting at 0.3 µl sample volume

• Full high-resolution scan from 200-900 nm for each sample*

• Built-in vortexer* Learn More

Free Trial Purchase
implen spectrophometer nanophotometer C40 for nucleic acid measurements

NanoPhotometer®

C40

Cuvette

Spectrophotometer

• Standard and Microvolume cuvettes (quartz, glass and plastic)

• Additional Applications: OD600 (Cell, Bacterial, Yeast Density), Bradford, BCA

• Temperature Controlled Cuvette Holder Learn More

Free Trial Purchase

“Great results and very accurate!”

Rating: 5.0   ★★★★★

Application Area: Protein assays and concentrations

“I love love love this machine. It’s portable, idiot proof, and accurate. For its DNA analysis, it is much more accurate than the old familiar, Nanodrop. I love the fact that it is so modifiable and easy to use. We use it for a variety of functions in the lab, including Bradford assays. I really love that there is a built-in graph for these and that you can email it to yourself or save on a USB stick. This machine is the thing we have all been needing but never knew we missed. Also the customer care is outstanding and I look forward to our rep every time she comes.”

Andrea Kuipers
Organization: California Institute of Technology, USA

“Producto NP80-Touch”

Rating: 5.0   ★★★★★

Application Area: Biologia celular y desarrollo

“Es un buen producto que facilita con rapidez y eficacia la medición de ácidos nucleicos y proteínas.”

Dr. Jesus Aguirre
Organization: Instituto de Fisiologia Celular, Mexico

“Great results! will highly recommend it for protein measurements. “

Rating: 4.7   ★★★★★

Application Area: Antibody measurements

“Great product! We use it [NP80] to measure antibody concentration. It is easy and efficient! They also have a great customer care service! The instrument has become an irreplaceable part of our company.”

Veena Kumari
Organization: Neobiotechnologies, USA

“Great machine with great results “

Rating: 4.7   ★★★★★

Application Area: Analysis of RNA, DNA, and protein concentrations

“This is an easy to use machine that gives great results. We have run it against several standard curves. Would definitely recommend it.”

George Perry
Organization: South Dakota State University, USA

“Best small volume spec on the market”

Rating: 5.0   ★★★★★

Application Area: Protein/nucleic acid quantitation

“The Implen NanoPhotometer N50 is extremely easy to use (intuitive menus and settings), accurate, and genuinely capable of measuring very small volumes repeatably. The touch screen works well even with gloves. Window configurations are adaptable so you can customize the information you’re looking at while working. The instrument is light and mobile, and since it’s all-in-one, you can literally move it to where you’re working as needed. It’s not stuck in a particular corner of the lab. In my opinion, it’s the best nano-scale measurement device on the market for routine lab sample quantification and spectral reading.”

David Rawling
Organization: Inflammatix, Inc., USA

“Small but excellent”

Rating: 5.0   ★★★★★

Application Area: Gastroenterologie/Hepatologie, Medizinisches Forschungszentrum

“The N60 is an excellent product for determining concentrations of nucleic acids and proteins. Advantages include the accessibility of measured data, as the device exports measurements as .csv and .pdf files and that the device can be cleaned with 70% Ethanol and water. Plus, it contains an in-built vortexer.”

Dr. Sabrina Rüschenbaum
Organization: Universitätsklinikum Essen AöR, Germany

“A wonderful instrument for nucleotide or protein quantification”

Rating: 5.0   ★★★★★

Application Area: Life Science

“It’s a delicate but powerful instrument which occupies very small space and is always on call.
As soon as one acquires this in his lab, he can enjoy the convenience and accuracy at the same time.”

Yu Ran
Organization: Zhejiang University, China

“Great accuracy of measurements, easy usage, really nice interface.”

Rating: 5.0   ★★★★★

Application Area: determination of the concentration of proteins and nucleic acids solutions

“C40 NanoPhotometer is a great tool to measure macromolecule concentrations in microvolumes. It surpasses our previous nanodrop machine as it does not need calibration and has more functions. Easy interface is a great advantage and the new function of enzyme kinetics together with vortex makes this small and handy tool a multitask help in our lab. The wi-fi functions enables us to print spectra quickly. Measurements are repeatable and accurate. I would recommend the equipment every biochemistry lab.”

Joanna Sliwiak
Organization: Institute of Bioorganic Chemistry, Laboratory of Protein Engineering, USA

Scroll to Top